Audex Assistive Listening Systems

Unique And Innovative Solutions For Hearing Impaired People

National Association of the Deaf
Picture
 Main Page
 Showroom
 Our Facilities
 Contact Us
 Finding Us
 Personal Sys.
Picture

EX-PS9

Technical Specifications

Coverage Pattern

Back View

Texas Giant

The Texas Giant

The EX-PS9 Emitter/Repeater is deserving of its nickname, “Texas Giant”. Featuring 495, eighty degree high power diodes, this emitter produces a broad, deep pattern well suited to large auditoriums, stadiums, coliseums, and out-of-door venues in theme parks and other public facilities. Mounted at a height of 20’ to 50’, the coverage pattern resembles a top, with an area up to 12,000 square feet. Using the Audex COC circuit, this unit emits with 92% efficiency, insuring maximum coverage for all applications. The circuit adjusts diode drive levels due to varying ambient temperatures. This feature, coupled with the overall light producing capabilities, and the efficiency of the REC-T3 neckloop receiver, allows Audex to offer effective infrared performance even out of doors in daylight. This means multiple areas in a park, auditorium, or convention center can use one frequency and therefore one set of receivers carried from venue to venue by the hearing impaired patron. The size and power of the PS9 makes cost/sq. ft. very reasonable.

In addition to its impressive light generating capabilities, the EX-PS9 offers flexibility not found in other brands of infrared. If AC power is not available at the emitter location, this unit can receive both signal and power through its three “Expansion Input” jacks. Three, three-conductor speaker wires originating at a EX-B-3 base, or Ex-BEX-6 Expansion, located in the control room, can provide this arrangement, totally eliminating the need for an AC outlet at the emitter. This makes retrofitting facilities easier and less costly.

If AC power is located within 20’ of the emitter, signal only can be carried to the first “Expansion Input” jack. Power must be supplied locally at all three “24V Expansion Input” jacks, or, if power is brought to the first input, power must be supplied only to the second and third inputs. The “Expansion Output” jacks can send signal, or signal and power to three other EX series emitters, making the daisy-chaining possibilities endlessly flexible.

With these features, no other brand of infrared emitter can offer anything close to the cost effectiveness of this family of products!

 

 

Back Panel View

Texas Giant Back Panel

     

    General Specifications:

Weight: 10.5 lbs.

Dimensions: 18”w x 11.5”h x 2”d

Freq. Resp: 100-20KHz

THD: Typically<2%

Diodes: 495 eighty degree@940nM

Diode Life: >100,000hrs

    Power Source:

Low Voltage DC supplied by “EX” series base or emitter, or three 24VAC transformers plugged into Expansion Input power jacks.

    Inputs/Outputs:

Expansion Input (three)

 Receives signal and power, or signal only through three XLR ports.

Expansion Output (three)

 Sends signal and power, or signal only through three XLR ports.

    Functions/Modes:

Carrier Frequency:

 95kHz supplied by EX-B-3, EX-BEX-6, or EX series emitter

Cables: three conductor 18ga speaker wire with XLR plugs for each input and output.

Coverage: Up to 12,000 sq. ft

Five Year Limited Warranty

 

Coverage Pattern

EX-Ps9 Coverage Pattern
[Main Page] [Showroom] [Our Facilities] [Contact Us] [Finding Us] [Personal Sys.]
Picture

Site Design and Layout by;  Clark Consulting

D Max Designs; the Clark Consulting Design Group