Audex Assistive Listening Systems

Unique And Innovative Solutions For Hearing Impaired People

National Association of the Deaf
Picture
 Main Page
 Showroom
 Our Facilities
 Contact Us
 Finding Us
 Personal Sys.
Picture

SA-PS1-U2

Technical Specifications

Coverage Area

Back View

“The Rattler” - Portable Infrared Emitter

The SA-PS1-U2 Master Emitter is a unique member of the popular Audex family of 95KHz broad band transmitters. Featuring 55, eighty degree high power diodes, this emitter produces a broad pattern well suited to small meeting rooms, courtrooms, classrooms, movie theaters, and as a portable system for anyone presenting lectures or seminars. Mounted at a height of 8’ to 10’, the coverage pattern resembles a flattened top, covering an area of up to 2,500 square feet. Mounted on a podium or speaker floor stand it will effectively serve a room up to 40’x50’. Using the Audex COC circuit, this unit emits with 92% efficiency, insuring maximum coverage for all applications. The circuit adjusts diode drive levels due to varying ambient temperatures. Since the Audex LighthLink REC-T3 receiver is resistant to electronic ballast lighting interference, all of the advantages of 95KHz broadband technology is available with this emitter system for courts, universities, and other government facilities.

Since this emitter is a master system, it provides a choice of direct input of up to two electret microphones, one line level input, or one speaker level input. A choice of voice quality, directional microphones featuring a 5 to 20 foot cable, or a PSA-MIC1, mini-mic that plugs directly into the back of the unit, are available. The mini-mic allows the speaker to stand within four feet of the back of the unit and lecture, eliminating the need to wear a microphone. These features combined with the reasonable cost, make the “Rattler” a perfect choice for portable infrared applications. Mounted on a podium, the five red LED’s are located on top, making them easy to see by the speaker. When mounted on the wall, they are located in the bottom louver providing a quick visual check for diode performance. Using the threaded nut located on the back of the unit, it can be mounted on wall or ceiling with a special Omni-Mount Bracket. This bracket allows for rotation in two planes and can be mounted by one installer. Installation is quick, easy and efficient.

When aesthetics are important, this unit can be custom colored to blend with the decor. A single 24VAC, UL/CSA approved wall transformer powers the system.

 

Back View of “The Rattler”

Back of the

 

General Specifications:

Weight: 1.2 lb.

Dimensions: 7.5”w x 4.5”h x 3”d

Freq. Resp: 100-20KHz

THD: Typically<2%

Diodes: 55 eighty degree@940nM

Diode Life: >100,000hrs

Replaceable Fuse:

 2 Amp AGC type

    Power Source:

24V, 50VA UL/CSA Listed Wall Transformer.

    Inputs:

Auxiliary: 0 dBm Operational from - 200 mV to 5 V peak-to-peak.

Microphones (up to two):

 2000 Ohm unbalanced ¼” jack for Electret mics.

Speaker Level:

 100 to 300 Watt, screw terminal type connections.

Adjustability:

 AGC Circuit automatically adjusts microphone sensitivity.

    Functions/Modes:

Carrier Frequency:

 95kHz

Coverage: Up to 2,500 ft2

 

 

Coverage Pattern of “The Rattler”

Coverage Area of
[Main Page] [Showroom] [Our Facilities] [Contact Us] [Finding Us] [Personal Sys.]
Picture

Site Design and Layout by;  Clark Consulting

D Max Designs; the Clark Consulting Design Group